Filter
Top Products
Aurorean Network Gateway-1000 User’s Guide
33
Chapter 3
Configuring the ANG-1000 with Aurorean Web Config
1 Click the Configuration Edit menu option.
The Configuration Edit window appears as shown in Figure 28.
Figure 28 Configuration Edit Window
2 Click on the command of your choice.
3 The arguments of the command you selected are displayed in the
Configuration File Edit window, as shown in Figure 29.
Aurorean Network Gateway 1000
Configuration File Edit
This Web application allows you to update and delete the system configuration
files of the ANG-1000. These files are used to control the ANG-1000 for its VPN
functionality, Internet and LAN connectivity, firewall capabilities, networking
startup commands and other key features of the ANG-1000 device.
Extreme caution needs to be exercised when modifying the system
configuration files of the ANG-1000. The raw contents of the files are exposed
for updating and improper editing could render the ANG-1000 inoperable. Bear
this in mind as you use this Web application.
When the configuration files are modified, the ANG-1000 device may need to
be rebooted in order for the changes to take effect. Other modifications to
configuration files can be made and their effects will be seen in the running
system. If you are not clear as to which type of change you are making, be sure
to click the “Reboot Now” button when prompted.
This list of files on the left displays the files contained in the ANG-1000 RAM-
based configuration file directory /etc/config. Most of these files contain
editable text, but some of them are stored as binary data and cannot be edited.
Help
Configuration Files
config
inittab
ipfwrules
options
ripd.conf
start
zebra.conf
ipfwrule.routing
dhcpd.conf
dhcpd.iplist
config.ike
hosts
pppoe
winsd.conf
,netrc
.resolv.conf
config.dat
dhcpd-cache.eth1
hostinfo-eth1
dhcpd.leases