Vehicle-Mount Antenna
A-4
Vehicle-Mount Antenna
The RoamAbout vehicle-mount antenna can be mounted on vehicles, such as fork-lift
trucks, that need continuous access to networked data whether inside or outside of the
building. The following table provides the specifications for the vehicle-mount antenna.
Table A-3: Vehicle-Mount Antenna Specifications
Mechanical
Connector Type (Access Point 2000)
•
FCC Countries
Reverse Polarity-N (Male)
• ETSI Countries: France, Japan,
Asia Pacific
Standard-N (Female)
Connector Type (RoamAbout R2)
•
FCC Countries
Standard-N (Female)
• ETSI Countries: France, Japan,
Asia Pacific
Standard-N (Female)
Electrical
•
Frequency Range
2400-2438 MHz
• VSWR (Voltage Standing Wave Ratio)
1.5:1
• Nominal Impedance
50 Ohms
• Gain
5 dBi
• Half-Power Beamwidth
NA
• Polarization
Vertical
• Power Handling
100 Watts
Antenna Environment
•
Operating Temperature
- 40°C to +60°C (-40°F to 140°F)
• Relative Humidity Range
0-100%
• Wind/survival (mph)
194 km/h (120 mph)
1
1
104 km/h (65 mph) with 1.25 cm (0.5 in.) ice.
• Wind rating
129 km/h (80 mph)
• Wind load
202 km/h (125 mph)