Support User Manuals

Enterasys Networks 7G4205-72 Switch User Manual

Open as PDF

of 96

Installing an Optional Network Expansion Module (NEM)

DFE-Platinum Series Hardware Installation Guide 3-3

Installing an Optional Network Expansion Module (NEM)

RefertotheEnterasys NetworkswebsiteforacurrentlistingoftheavailableNEMs.

SpecificinstallationinstructionsareshippedwitheachNEM.

Installinganetworkexpansionmoduleinvolves

•removingthesafetycoverfromtheDFE module(7G4285‐49),

•removingthecoverplatefromtheDFE module,

• installingthenetworkexpansionmodule,and

•replacingthesafetycover.

DFE Module Placement and Installation Rules

TheDFE‐PlatinummodulescanbeinstalledinaMatrix E7(referto“Matrix E7Chassis

ModulePlacement,”below,forplacementrules),Matrix N3,Matrix N5,orMatrix N7

chassis.

TheMatrix N3,Matrix N5,andMatrix N7chassissupportonlyDFE modulesandthere

arenoparticularrulesforinstallingmodules.

Matrix E7 Chassis Module Placement

DependingonthemodulesbeinginstalledintheMatrixE7chassisandtohelpensure

properoperation,considerthefollowingexamplesandrulesformoduleplacementinthe

chassis.Figure 3‐1showssixexamplesofchassismoduleplacement.Theseexamplesare

describedbelowalongwiththeapplicablemoduleplacementrule.

Note: Install any optional equipment before installing the DFE module into a chassis.

previous next