Filter
Top Products
PowerLite 1810p/1815p
3/08 PowerLite 1810p/1815p - 21
4. Select the projector you want to add by clicking its name,
then click the
Edit button. You see this screen:
5. Enter a Display name and select a Display icon. Select a
Parent group (if necessary) then enter a Monitor Password (if
necessary) and a Description for the projector. Click the
Register button. To register additional projectors with EMP
Monitor, repeat steps 2 through 5.
6. When you’re done adding projectors, click
Cancel. You see
a screen with a list of all registered projectors:
Note: If the projector is not automatically found, it may not be
connected or configured correctly for the network. To delete a
projector from the list, right-click the projector name, and click
Delete.
Monitoring Your Projectors
The EMP Monitor screen lets you monitor your projectors
using the Status, Video Source, and Error icons shown below.
This lets you see which projectors are currently being used,
from which source (or port) they are projecting an image, and if
a problem occurs.
For detailed status information, right-click the projector in
question and click
Property. The following tables describe the
status icons shown on the EMP Monitor screen.
Group status icons
No warnings or problems. All projectors in
the group are operating normally.
Warning or problem. A projector in the
group has a warning or problem.
Monitoring disabled. Right click the icon
and select
Monitoring Enabled to begin
monitoring the group.
Data is currently being updated.
Type status icons
No warnings or problems.
Warning or problem.
Monitor Password error. No monitor
password was entered when the projector
was registered, or an incorrect password
was entered.
Monitoring disabled. Right-click the icon
and select
Monitoring Enabled to begin
monitoring the projector.
Data is currently being updated.
Network error (for example, the projector is
not connected to the network, or the
power cable is disconnected).
You may also see this error if
Network Off
is selected in Standby Mode.
Network error (Esc/VP.net communication
error).