Filter
Top Products
16 Faxing a Document or Photo
Entering Fax Header Information
You should enter fax header information before sending faxes so that recipients can
identify their source.
Note:
If you leave the WorkForce 600 Series unplugged for a long period of time, the date and
time settings may get lost. See the on-screen Epson Information Center for instructions
on setting the date and time.
Entering Your Sender Name
1. Press the Home button.
2. Press
l or r to select Setup, then press OK.
3. Press
l or r to select Fax Setting, then press OK.
4. Select
Header, then press OK.
5. Press
OK to select Fax Header.
6. Use the numeric keypad to enter the header
information; for letters, press a numeric key until
you see the letter you want. (See page 17 for more
information.) You can enter up to 40 digits.
7. Press
OK to return to the Header menu.
Entering Your Phone Number
1. Select Your Phone Number from the Header
menu, then press
OK. You see the phone number
input screen.
2. Use the numeric keypad to enter your phone
number (see page 17). You can enter up to 20 digits.
(You don’t need to enter any dashes.)
3. Press
OK to return to the Header menu.