Filter
Top Products
26 Setting Up the Projector
When you’re done projecting from your computer, disconnect the
USB cable.
Connecting to the VGA Computer Port
You can connect to the projector using the VGA computer cable that
came with it (the monitor port on your computer must be a D-sub
15-pin port).
1. Connect one end of the VGA computer cable to the projector’s
Computer (Component Video) port and the other end to your
computer’s monitor port.
2. You may need to change the Input Signal setting in the
projector’s Signal menu to
RGB (see page 64).
3. You can connect an optional audio cable to play sound through
the projector (see page 34).
4. You may also be able to use the remote control as a wireless mouse
(see page 53).
When you’ve finished making connections, see page 37 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
caution
Don’t try to force a
connector to fit a port with a
different shape or number of
pins. You may damage the
port or connector.
PowerLite S6 Series/
PowerLite 78
PowerLite W6 Series
Computer (Component
Video) port