Filter
Top Products
94 Solving Problems
2. Adjust the
Tracking to eliminate vertical bands.
3. Adjust the
Sync setting to increase the image sharpness.
The image is too light or dark, or colors are incorrect.
■ Press the Color Mode button (PowerLite W6 Series only) or
select a different
Color Mode option in the Image menu. See
page 46 for details on the available options.
■ If you’re displaying video, adjust the Color Adjustment and
Color Mode settings on the Image menu. You can also try
adjusting the
Color Saturation, Color Temp, and Tint settings
on the Image menu.
■ Try adjusting the Brightness and Contrast settings on the Image
menu.
■ Try adjusting the Brightness Control setting (see page 65).
■ Check your computer display settings to correct the color balance.
■ The projector’s lamp may need to be replaced. See page 78 for
instructions.
■ Make sure the correct input signal is selected in the Signal menu
(see page 64).
■ Make sure that all cables are connected to the proper ports and
connected securely.
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.