Filter
Top Products
42 Displaying and Adjusting the Image
Selecting an Image Source
You may need to select the image source if you have multiple image
sources connected to the projector (such as a computer or DVD
player). Selecting the image source lets you switch between images
input from different pieces of connected equipment.
If you don’t see the image you want, do one of the following:
■ On the PowerLite S6 Series or PowerLite 78, press the Source
Search
button on the remote control or the projector until you
see the image you want to project.
■ On the PowerLite W6 Series, press the Search button or one of
the
Source buttons on the remote control, or press the Source
Search
button on the projector.
If you still can’t see an image or can’t project the same image that is on
your notebook or computer screen, see page 89 for solutions.
You can also select
Slideshow to project from a USB device or
SD card (PowerLite W6 Series only). See page 55 for instructions.
Source
Search
button
PowerLite S6 Series/PowerLite 78
Source
Search
button
Search
button
Source
buttons
PowerLite W6 Series