Filter
Top Products
3.
Hold the base so that the hooks are pointed down. Then position
the base next to the bottom of the monitor, as shown below.
4.
Insert the hooks on the base into the slots on the monitor.
5.
Slide the base down toward the front of the monitor until the
latch clicks into the locked position. Then turn the monitor
upright so it rests on its base.
Note
Always remove the tilt and swivel base before packing and
transporting the monitor. To remove the base, disconnect the
power cord from the electrical outlet and disconnect the cables
from the back of the monitor. Carefully set the monitor face
down on a padded surface. While pressing the release tab on
the bottom of the monitor, remove the base by lifting the hooks
out of the slots.
6 17” Super VGA Color Monitor