Epson A882181 Computer Monitor User Manual


 
When the monitor is about to delete a mode, all the parameter
indicators blink until you adjust one or more of the screen
parameters, indicating that you want the monitor to recognize and
save a user-defined mode. See the “Adjusting the Screen Image”
section below for instructions on how to adjust screen parameters.
The monitor accepts interlaced timing rates. However
g
interlaced modes are not recommended because they may
Adjusting the Screen Image
To adjust screen parameter settings for any video mode, follow
these steps:
1.
Display the screen image you need to adjust. Then open the
control box as described on page 10.
2.
Press the SELECT button. The indicator (LED) for a screen
parameter (such as Horizontal Position) lights up. If necessary,
press the SELECT button again until the indicator for a
screen parameter you want to adjust is lit.
3.
Adjust the screen parameters using the UP and DOWN buttons as
described in the table on page 11.
4.
Press the SELECT button until the indicator for the next screen
parameter (if any) you want to adjust is lit and then adjust the
parameter.
5.
Repeat steps 3 and 4 until you are satisfied with the image you
see.
The monitor saves your settings even after you turn it off.
16
17” Super VGA Color Monitor