Filter
Top Products
Unpacking the Printer
Note:
l
You’ll find the platen knob in a piece of the foam packing.
l
You’ll find the SelecType sticker inside the user’s manual. This
sticker is a useful reference for selecting fonts with the control
panel. You can put this sticker on either the printer cover or
the front cover provided with the optional cut-sheet feeder.
l
In some locations, the power cord is attached to the printer.
After removing the parts, store the packing materials in case you
ever need to transport your printer.
CAUTION: There are several different versions of the
printer designed for different electrical standards. It is not
possible to adjust the printer for use at another voltage.
The power supply type is shown on the label on the back
of the printer. If it does not show the correct voltage for
your country, contact your dealer.
Setting Up the Printer
1-3