Filter
Top Products
Printing
The print is faint or uneven.
l
Printed characters have parts missing at the bottom.
The ribbon cartridge may not be installed properly. See the
section on ribbon installation in Chapter 1.
l
The printout is faint.
The ribbon may be worn out. Replace the ribbon cartridge.
Check that the paper-thickness lever is set correctly for the
paper you are using.
Dots are missing in the printed characters or graphics.
l A line of dots is missing in the printout.
The print head is damaged. Stop printing and contact your
dealer or a qualified service person to have the printer
serviced.
l
Dots are missing in random positions.
There is either slack in the ribbon or the ribbon has come
loose. Reinstall the ribbon cartridge.
Printed characters are not what you expect.
l The typestyle or characters that are set by your software cannot
be printed.
Check that the software is correctly installed for your
printer.
l The font is selected in your software, but the characters are
printed in a different font.
Check that the correct font is selected in SelecType.
Troubleshooting 6-5