Filter
Top Products
Testing the Printer
Running the self test
The self test runs in draft mode or Letter Quality (LQ) mode,
depending upon which button you hold down as you turn on the
printer.
1.
Make sure the printer is turned off and paper is loaded.
2. While holding down the LINE FEED button (draft mode) or the
FORM FEED button (LQ mode), turn on the printer. After
printing starts, release the button.
CAUTION: After turning the printer off, always wait at
least five seconds before turning it back on. Turning the
power on and off rapidly can damage the printer.
3.
The self test continues until the paper runs out or you press the
ON LINE button. When you wish to. stop the test, press the ON
LINE
button.
Note: To resume the test, press the ON LINE button again.
Setting Up the Printer
1-17