EPSON Printers Supported by the
Ethernet Card
EPSON’s Ethernet Card can be installed in a variety of EPSON
laser and dot-matrix printers.
Check you printer guide for a list of optional interfaces that can be
installed in your printer, or check with your local EPSON dealer. If
you are using an optional LocalTalk interface, see your interface
guide for information on compatibility.
Overview
This manual describes how to install, configure, and use your
Ethernet Card in a variety of network environments using the
following cable connections:
Cl
Ethernet Twisted-Pair (l0BASE-T)
Q
Ethernet Thin Coaxial (l0BASE2)
Installation of the Ethernet Card in your printer is simple and is
described in Chapter 1. The following steps provide an overview
of the installation process.
1.
Install the Ethernet Card in your EPSON printer and connect it to
the network as described in Chapter 1.
2.
Follow the instructions for installation under your specific
network environment. Use the EPSON Net! software if you are
installing on a Novell NetWare network or use Epson Zoner
and Epson Namer (if required) if installing on an Ethertalk
network.
4 Introduction