Filter
Top Products
A password is not required for Ethernet Card operation. However,
if you wish to connect to a restricted file server, you will need to
use EPSON Net! to enter the encrypted password.
To enter the password, follow these steps:
1.
From the NetWare config dialog box, click
Password.
The
following dialog box appears.
2.
Type in the same password that you used to log on to the file
server and click
OK.
Caution:
Once
you make changes to the Ethernet
Card, you must wait for
at least five minutes before turning off or rebooting your printer.
Installing on Novell Net Ware
2-13