Filter
Top Products
Check Remedy
Is the color adjustment set correctly? Adjust the Gamma, RGB, or RGBCMY setting from the Configuration menu.
s Image - Advanced p.81
s "Adjusting the Image" p.49
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.81
Images appear dark
Check Remedy
Is the image brightness set correctly? Check the Brightness and Power Consumption settings from the Configuration menu.
s Image - Brightness p.81
s
Settings - Power Consumption p.84
Is the
contrast
g
adjusted correctly? Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.81
Is it time to replace the lamp? When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s "Replacing the Lamp" p.128
Is only one projector being used? Check if the following items are set to dark.
s Extended - Multi-Projection - Brightness Level p.86
s Extended - Multi-Projection - Multi-screen p.86
Problems when Projection Starts
The projector does not turn on
Check Remedy
Did you press the [
] button on the remote control or the [t]
button on the control panel?
Press the [ ] button on the remote control or the [t] button on the control panel to turn on the projector.
Problem Solving
116