Filter
Top Products
Administrator Settings menu
Submenu Function
Administrator
Password
Enter the password for the Administrator Settings menu for
network settings.
You can enter up to 16 single-byte alphanumeric characters. (*
cannot be used.)
If the administrator password is not set, click OK with an empty
password box.
Network Host
Name
This name is used to identify the projector on a network. Use for
Web control, "Connect to a Network Projector" and so on.
When editing, you can enter up to 15 single-byte alphanumeric
characters. (The only symbols you can use are - _. The first
character should be a letter, and the last character should be a
letter or a number.)
PJLink Password
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
(Symbols cannot be used.)
s "About PJLink" p.151
Submenu Function
Web Control
Password
Set a password to use when making settings and controlling the
projector using Web Control. You can enter up to 8 single-byte
alphanumeric characters. (* cannot be used.) Web Control is a
computer function that allows you to set up and control the
projector by using the Web browser on a computer connected on
a network.
s "Changing Settings Using a Web Browser (Web Control)"
p.145
Monitor Pass-
word
Set a password to use EasyMP Monitor.
You can enter up to 16 single-byte alphanumeric characters. (*
cannot be used.)
Secure HTTP
To strengthen security, communication between the projector
and computer in Web control is encrypted. When setting
security with Web control, it is recommended to set this to On.
Mail Notification
Goes to the Mail Notification setting menu.
s "Mail Notification menu" p.99
Manage Certifi-
cates
Goes to the Manage Certificates settings menu.
s "Manage Certificates menu" p.100
SNMP
Goes to the SNMP settings menu.
s "SNMP menu" p.100
Priority Gateway
For the priority gateway, select either Wired or Wireless.
AMX Device Dis-
covery
When you want to allow the projector to be detected by
AMX
Device Discovery
g
, set this to On. Set this to Off if you are not
connected to an environment controlled by a controller from
AMX or AMX Device Discovery.
Crestron Room-
View
Set this to On only when monitoring or controlling the projector
over the network using Crestron RoomView
®
. Otherwise, set
this to Off.
s "About Crestron RoomView
®
" p.152
Changes in projector settings take effect upon restarting.
When this is set to On, the following functions are not available.
• Web control
• Message Broadcasting (EasyMP Monitor plugin)
List of Functions
98