Filter
Top Products
Name Function
O
Lamp cover
Open when replacing the projector's lamp.
s "Replacing the Lamp" p.128
Rear
Name Function
A
Interface
s "Interface" p.9
B
Security slot
The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s "Anti-Theft Lock" p.75
C
Power inlet
Connects to the power cable.
D
Control panel
s "Control Panel" p.11
E
Cable holder
Insert the supplied cable clamp here to prevent the HDMI
cable from falling out.
s Quick Reference
Interface
Name Function
A
Audio1 port
Inputs audio from equipment connected to the Computer
port.
B
Computer port
For analog RGB signals from a computer and component
video signals from other video sources.
C
BNC port
For analog RGB signals from a computer and component
video signals from other video sources.
D
Audio2 port
Inputs audio from equipment connected to the BNC port.
E
RS-232C port
When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands" p.150
F
Remote port
Connects the optional remote control cable set and inputs
signals from the remote control. When the remote control
cable is plugged into the Remote port, the remote receiver
on the projector is disabled.
s "Optional Accessories" p.156
G
Audio-L/R port
Inputs audio from equipment connected to the Video port
or the S-Video port.
H
Video port
Inputs composite video signals from video sources.
Part Names and Functions
9