Filter
Top Products
Chapter 2
Using Your Computer
Turning On the Computer
......................
2-1
Turning Off the Computer
......................
2-3
Inserting and Removing Disks
...................
2-4
Stopping a Command or Program
.................
2-5
Resetting the Computer
.......................
2-5
Changing the Processor Speed
...................
2-6
Chapter 3
Installing and Removing Options
Removing and Replacing the Cover
................
3-2
Locating the Internal Components
.................
3-5
Changing the Jumper Settings
...................
3-6
Setting the Jumpers
.......................
3-8
Installing Memory Modules (SIMMs)
...............
3-9
Inserting SIMMs
.........................
3-10
Removing SIMMs
........................
3-12
Installing an Option Card
......................
3-13
Removing an Option Card
......................
3-16
Adding Video Memory
.......................
3-16
Installing the Math Coprocessor
..................
3-19
Post-installation Procedures
.....................
3-20
Chapter 4
Installing and Removing Drives
Installing a Hard Disk Drive in the Internal Drive Bay
. . . . . 4-2
Removing the Mounting Frames . . . . . . . . . . . . . . . 4-3
Connecting the Hard Disk Drive Cable. . . . . . . . . . . . 4-3
Connecting the Drive Cable to the System Board . . . . . . 4-4
Connecting the Drive and Power Cables to the Drive
. . . 4-5
Installing the Hard Disk Below the Mounting Bracket . . . 4-7
Installing the Hard Disk On the Mounting Bracket . . . . . 4-9
Removing a Hard Disk Drive From the Internal Drive Bay
. . . 4-11
Installing a Drive in the Upper Horizontal Drive Bay
. . . . . . 4-11
Connecting the Drive and Power Cables . . . . . . . . . . . 4-14
Removing a Drive from the Upper Drive Bay . . . . . . . . . . . 4-17
Post-installation Procedures . . . . . . . . . . . . . . . . . . . . . 4-17
viii