Filter
Top Products
23
Adjusting the Display
Adjusting the projection size
The size of the projected image is basically determined by the
distance from the projector to the screen. s "Projection distance and
screen size" P.10
A
Press the [Wide] or [Tele] buttons on the control panel
to adjust the projection size.
[Wide] : increase the size
[Tele] : reduces the size
If you would like to enlarge the image further, move the projector
further away from the screen.
Setting the focus
A
Turn the focus ring to adjust the image focus.
p
• The default setting is wide.
• The E-Zoom function lets you enlarge parts of the image.
s "E-Zoom" P.30
p
• If the surface of the lens is dirty, or misted over as a result
of condensation, it may not be possible to adjust the focus
correctly. If this happens, clean or de-mist the lens.
s "Cleaning the lens" P.54
• If the projector is positioned outside the normal projecting
range of 87-1109 cm (2.9-36.4 ft.), it may not be possible to
obtain the correct focus. If you have trouble obtaining the
correct focus, check the projection distance.