Epson EMP-S1H Projector User Manual


 
24
Basic Operation > Adjusting the Display
Adjusting the projection angle
Set up the projector so that it is at right angles to a screen.
If it is not possible to set up the projector so that it is at right angles to a
screen, it can be set up at a slight vertical angle instead. (Max 10°)
A
Raise the front of the projector while pressing the feet
buttons on both sides.
Extend the front feet.
Seen from the side
Centre of lens
Seen from above
1
9.6
p
• The height can be adjusted by turning the base of the front
feet on either side.
Press the front feet buttons on both sides and slowly lower
the projector down to return to its normal position.