Filter
Top Products
35
Advanced Operations
Auto stand-by: When playback has finished or been stopped, or an operation
has not been performed for around 3 minutes, the power switches off
automatically.
Sleep timer: Once the set time has elapsed, the power switches off
automatically. You can prevent unneccesary power being consumed if you fall
asleep while watching a movie.
You cannot use auto stand-by and sleep timer at the same time.
Press .
• Each time you press , the display window display changes as
follows. Press repeatedly until the desired item is displayed.
• If you select something other than "A.STBY ON", auto stand-by is
cancelled.
Setting auto stand-by
"A.STBY" flashes approximately 20 seconds before the power switches off.
Changing the sleep timer
Press repeatedly and select the new time.
Checking the sleep timer setting
Once the sleep timer has been set, if you press once, the set time is displayed
in the display window.
Canceling the sleep timer
Perform either of the following operations.
Press .
Press repeatedly until "SLEEP OFF" is displayed in the display window.
QTip:
• Sleep timer settings are not memorized. If the power is switched off, the
sleep timer is canceled.
• When in external video mode, video is switched off automatically if no
signal is input and no operations are performed for 30 minutes. This
function is performed regardless of the sleep timer settings.
• Auto stand-by cannot be used when in external video mode.
• Auto stand-by does not work with discs that return to the menu once
playback has completed.
Auto-standby, goodnight timer (Sleep timer) settings
Set to the [Function] position before
performing operations
Auto stand-by is activated.
After 10 minutes have elapsed, the power
switches off.
After 150 minutes have elapsed, the power
switches off.
Sleep timer is cancelled.