Epson EMP-TWD1 Projector User Manual


 
53
Appendix
When the or indicators flash orange Warning
: lit : flashing : off
High-speed cooling in
progress
You can continue projecting in
this state. Projection stops
automatically if subsequent
high temperatures are
registered.
Check the 2 items listed to the
right.
Move this unit away from the
wall by at least 20 cm.
Clean the air filter.
s page 56
If there is no improvement
when you press and
switch the power on,
discontinue use and
disconnect the power cable
from the electrical outlet.
Contact your dealer.
s page 65
Lamp replacement notification
It is time to replace the lamp. Replace the lamp with a new one as soon as possible.
If you continue use when in this state, it is possible that the lamp may explode.
s page 58
When the or indicators are off Normal
: lit : flashing : off
Standing-by
Shows that this unit is ready to be used.
Warming up
(approx. 20 seconds)
In warm-up mode pressing or has no effect.
Do not turn off the power or unplug the unit during warm-up, as this
may reduce the lifespan of the lamp.
Projection in
Progress
Cooling down
(approx. 9 seconds)
The operation of all remote control and main unit buttons is suspended
during cool-down.
Enters stand-by mode once cool-down has completed.
Do not turn off the power or unplug the unit during cool-down, as this
may reduce the lifespan of the lamp.
Break
Press to return to normal playback.
Orange
Green
Orange
Green
OrangeOrange
Green GreenGreen
Green GreenGreen
Green Orange
Green GreenGreen