Filter
Top Products
42
The audio of a DVD video may be recorded at a level (volume) which is lower
than other kinds of disc. The unit's default setting recognises and plays DVDs
at a higher volume. Make the following settings if this difference bothers you.
Press during playback.
Each time you press , the display window display changes as
follows. As you listen to the audio being played, press repeatedly until
the setting you want is displayed.
You can adjust the audio input level of equipment connected to the Audio port.
1
Press and switch to the external video mode.
2
Press and hold for approximately 2 seconds.
Each time you press and hold , the display window display changes
as follows.
QTip:
• The setting is only effective when is played. Even if this
setting is changed, the output level from the Optical Audio-Out port
does not change.
• This operation can also be performed when stopped or paused.
Adjusting the audio playback level
Set to the [Function] position before
performing operations
Standard
Middle
High (default setting)
Adjusting the audio input level of external audio equipment
Set to the [Function] position before
performing operations
For normal use (default setting)
Use this setting when the input level from external
equipment is too low and the audio is difficult to hear.