Filter
Top Products
10 Connecting to a Desktop Computer
1. Determine which type of mouse port your computer has:
■ Round PS/2 mouse port
■ Flat USB mouse port
2. Connect one end of the appropriate mouse cable to the
PS/2
Mouse/Com port or the USB Mouse port on the
projector.
3. Connect the other end to the mouse port on your
computer. (Your computer’s mouse will be disabled while
you are using the remote control as a mouse.)
Connecting to a Desktop Macintosh
To connect the projector to your desktop Macintosh,
®
you
need to:
■ Connect the computer cable
■ Connect the audio cable (if you’ll be projecting with audio)
■
Connect the mouse cable (if you want to use the remote
control as a mouse)
If you connect the projector to your Macintosh, you cannot
view your images on the computer monitor.
Follow the steps in each section for the cables you need to
connect.
connecting PS/2 mouse cable connecting USB mouse cable
note
Macintosh configurations
vary. See your computer
manual for the location of the
ports needed to connect your
projector.
appendix.book Page 10 Tuesday, December 14, 1999 4:08 PM