Filter
Top Products
Connecting to a Desktop Computer 15
3. Use the tab on the lens ring to rotate the ring and pop out
the lens.
4. Squeeze the lens cap tabs and remove the lens cap.
5. Press the red
Power button on top of the projector.
The power light flashes green, and then stays on. You may
see a blue screen with the message
No Signal displayed.
This is normal.
6. Turn on or restart your computer. In a few moments, you
should see the computer display projected.
tab
Squeeze here
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and
is especially dangerous for
children.
power light
power
button
appendix.book Page 15 Tuesday, December 14, 1999 4:08 PM