Filter
Top Products
14 Connecting to a Desktop Computer
1. Determine which type of mouse port your Macintosh has:
■ Round mouse port
■ Flat USB mouse port
2. Connect one end of the appropriate mouse cable to the
standard
Mouse/Com port or the USB Mouse port on the
projector.
3. Connect the other end to the port on your Macintosh.
Turning the Projector On and Off
After you have connected your computer and other equipment,
you can plug in the projector and turn it on.
1. Connect the power cable to your projector’s power inlet.
2. Plug the other end of the cable into a grounded electrical
outlet.
The power light on top of the projector turns orange. This
indicates that the projector is receiving power, but is not yet
turned on.
connecting Mac mouse cable connecting USB mouse cable
power light
appendix.book Page 14 Tuesday, December 14, 1999 4:08 PM