Filter
Top Products
8 Connecting to a Desktop Computer
Connecting the Computer Cable
Before you start, make sure your projector, computer, and all
peripherals are all turned off.
1. Disconnect the monitor cable from the monitor port on the
back of your computer.
2. Connect one end of the projector’s computer cable to the
projector’s Computer port.
3. Connect the other end of the cable to your computer’s
video (monitor) port.
4. Tighten the screws on all connectors.
If you don’t need to make any other connections, you can plug
in your projector and turn it on. See page 14 for instructions.
appendix.book Page 8 Tuesday, December 14, 1999 4:08 PM