Filter
Top Products
Using the Projector Menus 27
3. Press Enter to select this feature. You see the following
message:
4. Select
Yes and press Enter. A selection box displays over
the image.
5. Use the
Enter button on the remote control to select the
area of the image you want to use. Once you have selected
the entire area, press Enter.
6. When you see the message “Do you use this image?” select
Yes and press Enter. If you want to change the area
selected, select
No and repeat step 5. You see the following:
7. Use the Enter button on the remote control to select a
zoom rate (display size), and then press
Enter.
appendix.book Page 27 Tuesday, December 14, 1999 4:08 PM