Filter
Top Products
Connecting to a Desktop Computer 11
Connecting the Computer Cable
Before you start, make sure your projector, computer, and all
peripherals are all turned off.
1. Disconnect the monitor cable from the monitor port on the
back of your Macintosh.
2. Connect one end of the computer cable to the projector’s
Computer port.
3. Connect the other end to the monitor port on your
Macintosh.
note
If you have an older
Macintosh, you may need to
use a Macintosh adapter
(available from Apple
®
).
Check the documentation for
your Macintosh to determine
what type of connections are
available.
Macintosh adapter,
if necessary
appendix.book Page 11 Tuesday, December 14, 1999 4:08 PM