Filter
Top Products
1 • Setting Up the Projector
14
You will not need all these components; your configuration will
determine which ones you need.
Save all packaging in case you need to ship the projector in the future.
Always transport the projector in its original packaging (or the
equivalent), or use a carrying case if you are carrying the projector by
hand. (See page 123 for instructions.)
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
● To receive an S-Video signal, you need an S-Video cable. (One is
usually provided with your video device.) A separate cable is
required for each video source.
● To connect a second computer, you need a computer video and
audio cable.
● To connect the projector to a Macintosh PowerBook, you need a
video-out cable. (One is provided by—or can be purchased
from—Apple for all new PowerBooks that have video-out
capability.) If your PowerBook does not include one, see your
Macintosh dealer.
● To connect the projector to an external sound system, you need an
RCA-to-3.5 mm stereo audio cable. You can obtain one from your
computer dealer.
● To connect the mouse cable to your computer, you may require a
special connector, cable, or other components. You can obtain
these items from your computer dealer.
5300.book Page 14 Tuesday, April 13, 1999 4:19 PM