Filter
Top Products
1 • Setting Up the Projector
48
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio cable to
the Audio 1 jack on the projector. (Use the Audio 2 jack if you
are connecting a second computer.)
2. Connect the other end of the audio cable to the audio-out port on
your PowerBook.
Note: After you turn on the projector and computer, you’ll need to choose
Mirroring in the Display Control Panel if you set up your configuration to
display on the LCD screen as well as the projector screen.
Audio 1 jack
audio cable
5300.book Page 48 Tuesday, April 13, 1999 4:19 PM