Filter
Top Products
1 • Setting Up the Projector
22
3. Connect the other end of the projector video cable to the
computer’s video port.
4. Tighten the screws on all connectors.
Connecting the Mouse and Serial Cables
If you want to use the remote control as a mouse or use the ELP
Link III software, you need to connect the main cable. It provides
connectors for:
● The PS/2 mouse cable (to use the remote control as a mouse)
● The serial cable (to use the ELP Link III software and the Effects
buttons on the remote control)
Refer to this illustration while following the steps below.
PS/2 mouse cable
main cable
9-pin serial cable
Mouse/Com 1 port
5300.book Page 22 Tuesday, April 13, 1999 4:19 PM