Filter
Top Products
Controlling the Projector
67
Using the Remote Control
The remote control uses a line-of-sight infrared signal. To use the
remote control, point it towards one of the remote control receivers
located at the front and back of the projector. (See page 58.)
You can use the remote control up to about 32.8 feet (10 meters) from
the projector. (This distance may be shorter if the remote control
batteries are low.) You must also be within a
± 30° angle from the front
or rear sensor.
bottom
multi-purpose
button
pointer
button
top multi-purpose
button
5300.book Page 67 Tuesday, April 13, 1999 4:19 PM