Filter
Top Products
Connecting to a Computer
37
1. Connect the small end of the main cable to the projector’s
Mouse/Com 1 port. (Use the Mouse/Com 2 port to connect a
second computer.)
2. To use the remote control as a wireless mouse, connect one end of
the projector’s Mac mouse cable to the MOUSE terminal on the
large end of the main cable.
3. Disconnect your Macintosh’s mouse cable. Connect the other end
of the projector’s Mac mouse cable to the mouse port on your
Macintosh.
5300.book Page 37 Tuesday, April 13, 1999 4:19 PM