Filter
Top Products
39
List of Functions
Operation Direct Power ON:
Sets whether direct power on is enabled (“ON”) or disabled (“OFF”).
When you set to “ON” and leave the power cable connected to a wall socket, be aware of that sudden surges of electricity that may occur when
power comes back on after a power outage may cause the projector to turn on automatically.
Sleep Mode:
Sets whether projection stops automatically (“ON”) or not (“OFF”) when no operations are carried out for approximately 30 minutes while no
image signals are being input.
Fan Speed:
When using the projector at an altitude of about 4900 ft (1500 m) or higher, set to “High.”
Link 21L Sets whether the EMP Link 21L utility software is being used or not.
To enable the EMP Link 21L, turn the projector's power off and wait until the cool down period has finished.
Language Sets the language for message displays.
Reset Returns “Display” and “Operation” settings in the “Extended” menu (except for “Fan Speed”) to their default settings.
If you would like to return all menu items to their default, see “Reset All.” sp.41
Sub-menu Function