Filter
Top Products
Connecting to a Macintosh
1. Turn off the printer and your Macintosh.
2. Connect the cable to the serial connector on
the back of the printer.
3. Connect the other end of the cable to either
the modem port or the printer port on
your Macintosh.
Note:
If you’re using a PowerBook
™
with a combination printer/modem port,
use that port and select modem in the Chooser. Make sure AppleTalk
®
is
inactive before turning on the printer.
5 Load Paper
1. Slide the left edge guide all the
way to the left and pull out
the output tray extensions.
2. Fan a stack of plain paper
and then even the edges.
3. Load the stack with the
printable surface face up.
Push the paper against the
right edge guide.
Note:
Don’t load paper above the arrow mark inside the left edge guide.
Keep unused paper in its original packaging and store it in a cool, dark
place.
output tray
extensions
left edge
guide
6
Comoro+ GS Booklet 3/17/98, 4:35 PM10