Filter
Top Products
Now you are ready to load the continuous-feed paper. Just follow the
steps below:
1. Using Figure 1-7 as a guide, pull the locking levers on the
pin-feed holders forward so that you can move the holders to
the left and right.
Figure 1-7.
Pin-feed
locking levers
2. Move the left holder so that the locking lever is about 1/4 inch
from the left side and push the locking lever back to lock that
holder in place. Leave the right holder unlocked.
3. Open the pin-feed covers as shown in Figure 1-8.
WARNING
Do not use the pin-feed covers to move the pin-feed holders.
1-8
Setting Up Your FX Printer