Filter
Top Products
ESC -
Turn Underlining Mode On/Off
Format:
ASCII code:
ESC - n
Decimal:
27 45 n
Hexadecimal: 1B 2D
n
Comments:
The following values can be used for n:
1: Mode is turned ON.
(The characters “0” and “1”
0: Mode is turned OFF.
can also be used.)
This mode provides continuous underlining, including spaces.
Word Processing
ESC a
NLQ Justification
Format:
ASCII code:
ESC
a
n
Decimal:
27 97 n
Hexadecimal: 1B
61 n
Comments:
The following values can be used for n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is n = 0. Full justification (n = 3) is performed
when the buffer becomes full or when one of the following is
received: CR, VT, LF, FE The commands HT and BS are invalid
except in n = 0 mode. For n = 3 there must be no carriage returns
within a paragraph. Justification can be used in NLQ only, not draft.
A-28
Command Summary