Filter
Top Products
ESC SP (space)
Format:
ASCII code:
ESC SP n
Decimal:
27 32 n
Hexadecimal: 1B 20 n
Set Intercharacter Space
Comments:
Sets the amount of space added to the right of each character, in
addition to the space already allowed in the design of the character.
The number of units of space is equal to n, which should be from
O-63. Each unit of space is 1/120th of an inch.
Character Sets
ESC t
Select Character Table
Format:
ASCII code:
ESC t n
Decimal:
27
116 n
Hexadecimal:
1B 74 n
Comments:
The following values can be used for n:
0: Selects italics.
1: Selects Epson Character Graphics.
Selects the character table used by codes 128-255. Selecting Epson
Character Graphics does not disable italic printing. Italic printing
can still be selected by ESC 4. Duplicates the function of DIP switch
1-3. Note that the value of n must equal 00 hex or 01 hex; the
characters “0” and “1” cannot be used.
Command Summary
A-29