Filter
Top Products
ESC \
Set Relative Position
Format:
ASCII code:
ESC \ n1 n2
Decimal:
27 92 n1 n2
Hexadecimal: 1B 5C n1 n2
Comments:
Determines the position (relative to the current position) at which
printing of following data will start. To find nl and n2, first calculate
the displacement required in 1/120ths of an inch. If the displacement
is to the left, subtract it from 65536. Send the resulting number
using this formula: total number of dots = n1 + (n2 x 256). The
command is ignored if it would move the print position outside the
current margins.
Horizontal tabbing
HT
Format:
ASCII code:
HT
Decimal:
9
Hexadecimal: 09
Tab Horizontally
Comments:
Advances the print position to the next horizontal tab setting. The
default settings are at intervals of eight characters in the default pitch,
and tab positions are not affected by subsequent changes in character
pitch.
A-20
Command Summary