Filter
Top Products
5
Turning On the Printer
Before plugging in the power cord, see that the power switch near
the back of the left side of the printer is turned off; then plug the
power cord into a properly grounded socket.
WARNING
Before turning on the printer, be absolutely sure you have removed all
packing materials. Turning on the printer when the print head cannot
move may seriously damage the mechanism.
Now, turn the power ON with the switch on the left side of the
printer. When you turn on the printer, three things happen:
l The print head moves back and forth and stops at the left side of the
printer; this is the home position.
l
The printer is initialized and set to certain default settings (which are
fully described in Appendix D).
l The green power light on the control panel comes on.
6 Operating the Control Panel
The control pane! is shown in Figure 1-12.
Figure 1-12.
The FX control panel.
1.12
Setting Up Your FX Printer