Filter
Top Products
DIP Switches
Skip over perforation
DIP switch 2-3 controls the skip over perforation function. If this
switch is on when you are using continuous paper, the printer
leaves a one-inch (25.4 mm) margin between the last printed line on
one page and the first printable line on the next page so that the
printer skips over the perforation.
Most application programs take care of the top and bottom
margins. Therefore, do not turn on skip over perforation unless
your program does not provide these margins.
If you adjust your top of form position to the proper point, you
can get half of the margin at the bottom of one page and half at the
top of the next page as shown below.
DIP SW2-3 OFF (Skip over perforation OFF)
23456789:
;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]
3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^
456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^'_
6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'a
789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\l^_at
89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\l]^_'abc
9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcd
:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcde
DIP SW2-3 ON (Skip
over
perforation ON)
l
23456789
:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]'
3456789:
;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
l
456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'a
6789:;<=>?@ABCDEFGHJIKLMNOPQRSTUVWXYZ[\]^_'at
3-10
Using the Printer