Filter
Top Products
Chapter 6
Command Summary
This summary contains all the commands used by the printer. If a
command has no parameters, it is merely listed. If it has parameters,
they are explained. The parameters are indicated by lowercase
italicized letters, usually n. The examples below show how the
parameters are indicated.
ESC @ is a command with no parameters.
ESC U l/0 is a command that uses 1 to turn the feature on and 0 to
turn it off.
ESC $ n1 n2 is a command with two parameters.
ESC D nn is a command with a variable number of parameters.
ASCII
Dec. Hex.
Description
Printer Operation
ESC@ 64 40 Initialize Printer
DC1
17 11 Select Printer
DC3 19 13 Deselect Printer
DEL 127 7F Delete Character
ESC <
60 3C Select Unidirectional Mode (one line)
ESC U 1/0 85 55 Turn Unidirectional Mode On/Off
ESCEMn
25 19 Control Cut Sheet Feeder Mode
4: Turns mode on
R: Ejects a sheet
0: Turns mode off
Note: For the ESC EM command the variables are the characters “0" (48 decimal
or 30 hex) and
"4"
(52 decimal
or 34 hex). Do not use 1 decimal, 01 hex, 4 decimal,
or
04 hex.
ESC=
61 3D Set MSB to 0
ESC> 62 3E
Set MSB to 1
Command Summary 6-1