Filter
Top Products
4.
5.
6.
7.
Attach the interface board cover with the two screws you
removed in step 5.
Note:
Do no attach the interface cover if an optional interface is
installed.
Reconnect any interface cables you removed.
Reinsert the optional font cartridge and lower paper
cassette if you have these options.
Be sure the power is turned off; then plug the power cord
into an electrical outlet.
Printing a status sheet
To print a status sheet to verify that EpsonScript is properly
installed:
1.
Turn on the printer.
2.
Press the
Menu
button to enter SelecType.
3.
Press the
Menu
button several times until TEST MENU
appears on the display.
4.
Press the
Item
button; you should see PS STATUS SHEET on
the display.
5.
Press the
Enter
button The printer prints the status sheet,
showing the current EpsonScript printer settings.
6.
Press the
On Line
button to put the printer back on line.
1-8 Setup