Filter
Top Products
<SO>
<ESC> <SO>
<DC4>
<ESC> “W” n
<SI>
<ESC> <SI>
<DC2>
<ESC> “E”
<ESC> “F”
<ESC> “G”
<ESC> “H”
<ESC> “4”
<ESC> “5”
<ESC> “-” n
<ESC> “S” n
<ESC> “T”
Selects one-line expanded width print.
Selects one-line expanded width print.
Cancels one-line expanded print.
Turns expanded width print ON (n=l) or turns expanded
width print OFF (n=0).
Selects compressed width print.
Selects compressed width print.
Cancels compressed width print.
Selects emphasized print.
Cancels emphasized print.
Selects double-strike print.
Cancels double-strike print.
Selects italic print.
Cancels italic print.
Turns underlining ON (n =l) or turns underlining OFF
(n=0).
Selects superscripts (n =0) or selects subscripts (n = 1).
Cancels superscripts and subscripts.
Character Set Commands
<ESC> “%” n
Selects the user-defined character set (n=l) or cancels the
userdefined character set (n =0).
<ESC> “&” <NUL> n1 n2 data
Defines user-defined characters (32 n 127).
<ESC> ":” <NUL> <NUL> <NUL>
Copies ROM character set to user-defined character set.
<ESC> “R” n
Selects international character set (0 n 10).
Graphics Commands
<ESC> “K” n1 n2 data Prints single-density dot graphics.
(ESC) “L” n1 n2 data
Prints double-density dot graphics.
(ESC) “Y” n1 n2 data
Prints high-speed double-density dot graphics.
(ESC) “Z” n1 n2 data
Prints quadruple-density dot graphics.
(ESC) ”*” s n1 n2 data
<ESC> “7” s n
Prints selected-density dot graphics.
Assigns graphics densities.
Miscellaneous Commands
<CAN>
Cancels the current line.
<DEL>
Deletes the preceding character.
<DC3>
Turns printer to off-line state.
<DC1>
Turns printer to on-line state.
(ESC) “V” n data <ESC> “V” <NUL>
<ESC> ">"
<ESC> “=”
<ESC> “#”
<BEL>
<BS>
<ESC> “@”
<ESC> “8”
<ESC> “9”
<ESC> “<"
<ESC> “U” n
<ESC> “s" n
Repeats
data, n
times (1 n 255).
Sets the eighth data bit to 1.
Sets the eighth data bit to 0.
Cancels control of the eighth data bit.
Sounds the buzzer.
Produces a backspace.
Resets the printer.
Turns the paper detector OFF.
Turns the paper detector ON.
Causes the next line to be printed left-to-right.
Selects unidirectional printing (n =1) or bidirectional printing
(n=0).
Selects half speed printing (n = 1) or normal speed printing
(n=0).