Filter
Top Products
Fig-we 1-1. Unpacking the LQ-1500
during operation. Here are some additional suggestions to follow:
1.
Place the LQ-1500 on a flat, stable surface. The printer will make
more noise if you place it on a table that moves or vibrates.
2. Connect the printer to a grounded electrical outlet (do not use an
adapter plug). It’s a good idea to choose an outlet which is not
controlled by a wall switch that could be accidentally shut off dur-
ing the printing process.
3. Choose a location which will allow enough space beneath or
behind the printer to load the paper. If you are using continuous (or
pin-feed) paper, the paper path should be free from obstruction
(see Figure
1-2).
4. Protect the printer from prolonged exposure to direct sunlight,
moisture, and dust. Make sure that it is not close to a heater or any
other heat source.
4