Filter
Top Products
Skip Over Perforation
By changing the setting of DIP switch 2-3, you can set skip over
perforation to ON or OFF. If this feature is ON when using
continuous paper, a one-inch margin is provided between the last
printed line on one page and the first printable line on the next
page. This feature is very convenient if your application program
does not provide for top and bottom margins.
If you adjust your loading position correctly, you can get half of
the margin at the bottom of one page and half at the top of the
next page, as shown in the following illustration.
DIP SW2-3 OFF (Skip over perforation OFF)
l 23456769:;<=>?@ABCDEFGHIJKLMNOPQRSTWW
3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVwK
456789:;<=>?@ABCDEFGHIJKIMNOPQRSTWWKY
l 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTWWKYZ
6789~;~=>?W3CDEFGHIJKfrMNOPQRSTWWKYZC
-----
----------_---__
789:;~=~?@ABCDEFGHIJKLMNOPQRSTWWKYZ~\
l 89:;<=~?@ABCDEFGHIJKLMNOPQRSTUVWKYZ[\J
9:;<=>?@ABCDEFGHIJKLMNOPQRSTWWKYZC\3^
4B
:;<=>?@ABCDEFGHIJKLMNOPQRSTWWKYZ[\J--
;c=>?SABCDEFGHIJKI&lNOPQRSTUWKYZ[\]--’
DIP SW2-3 ON (Skip over perforation ON)
*
23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUW
3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW
m
456789:;<=>?@ABCDEFGHIJKLMNOPQRSTWWKY
56769:;<=>?@ABCDEFGHIJKLMNOPQRSTWWKYZ
6789:;<=>?@ABCDEFGHIJKL&lNOPQRSTWWYZC
3-10
Using the Printer