Filter
Top Products
Adjusting the Loading Position
Using micro-adjustment
1.
Make sure that the printer is turned on and that either a single
sheet or continuous paper is ready to be loaded.
2.
Press the LOAD/EJECT button to feed paper to the loading
position. Then press the ON LINE button; the ON LINE light then
begins to blink.
:X-JO
N
L
1
N
E
a
OFF LINE
Note: You
can use the FORM FEED and LINE FEED buttons for
micro-adjustment only while the ON LINE light is blinking.
3.
Press the FORM FEED button to feed the paper forward or the
LINE FEED button to feed the paper backward. When you’ve set
the desired loading position, you can begin printing; the ON
LINE
light stops blinking automatically.
Using the Printer
3-13