Filter
Top Products
Using Short Tear-Off
When you are finished printing, the short tear-off feature
automatically feeds the perforation of the continuous paper to the
tear-off edge of the printer cover so that you can tear off the last
sheet. When you resume printing, the paper feeds backward to the
loading position. This feature lets you save the paper normally lost
between documents.
To use this feature, set DIP switch 1-4 to OFF and load continuous
paper.
ONA
SW2
You can leave the short tear-off feature turned on (DIP switch 1-4
OFF) even when you are using single sheets. When you move the
paper release lever to the single sheet position, short tear-off is
disabled.
WARNING: Never use the short tear-off feature with
labels. Otherwise, labels may come off the backing and
jam the printer.
Using the Printer 3-15